Click To Call(656) 254-3570Click To Get A Free Estimate
Brick paver walkway curving toward a front door with a sealed, even finish

A sealer matched to your brick

Brick Paver Sealing in Carrollwood, FL

Call (656) 254-3570 for a free estimate on sealing the brick pavers at your Carrollwood home.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3570

Can my Carrollwood brick pavers be sealed, and how soon is the reply?

A local contractor seals brick pavers in Carrollwood, FL, and your request is answered within 1 business day, often a good deal sooner. Looking over the surface and giving a price cost nothing. To start the conversation, call (656) 254-3570.

Brick is a classic look, and Rusty's Pro Wash & Seal, a Pinellas County company, calls it excellent in durability. It also drinks sealer differently from concrete, so the product matters more than it does on other pavers. A good match deepens the color and keeps the joints full. To have a contractor read your brick, get a free estimate.

Call (656) 254-3570

Is my paver clay brick or concrete, and does it change the job?

It does. Rusty's says brick absorbs sealers differently than concrete and often needs products formulated for clay, and that concrete pavers are the most common type in Tampa Bay. Unilock warns that a sealer made for concrete may not suit brick or natural stone. Many brick-look pavers are concrete, so the contractor checks before choosing a product. Say what you know about yours when you get a free estimate.

A quick way to describe it is the install paperwork or the name on the pallet label, if you kept either. If not, the contractor can tell by the weight, the edges and how water soaks in. To ask who can look at yours, call (656) 254-3570.

Which Carrollwood area neighborhoods can request a brick paver visit?

Homes in Carrollwood and in every place below can ask for a brick paver estimate, and each place has a page of its own. If your street is missing, call (656) 254-3570.

Contractor kneeling at a brick paver walkway to show a homeowner the sealed and unsealed finish

Should brick get a penetrating sealer or a film?

For outdoor brick, Old Mill Building Products says to use breathable penetrating sealers such as silane or siloxane and not film-forming acrylics or urethanes. Unilock describes water-based and solvent-based products, notes that water-based ones can harden joint sand and says solvent-based ones evaporate faster. Because the guidance differs by product and by paver, ask the contractor to name the sealer and say why it fits your brick. To compare choices, call (656) 254-3570.

The finish is a separate choice. Rusty's lists natural look, wet look and high gloss, with natural suiting quieter styles and natural stone. Unilock says a high gloss coat gets slick once it is wet. Ask for a sample on your brick when you get a free estimate.

Will sealer change the color of my brick pavers?

It can. Old Mill says sealers can darken brick or change its sheen, and Unilock says a wet look sealer deepens color and may add gloss. That is why both sources suggest testing a small, hidden area first and letting it dry fully. Ask where the test patch will go when you call (656) 254-3570.

What is the white haze on brick, and should it be sealed over?

The haze is efflorescence, a salt deposit that rises through the paver with moisture. Unilock says it typically fades in 2 to 3 months and can take up to a year, and that deposits should be cleaned and the surface dried before sealing. Old Mill says not to seal over efflorescence, dirt or moisture, because the coat locks them in. If your brick looks chalky, mention it when you get a free estimate.

Rusty's adds that salt water pools speed efflorescence, which matters for brick near a pool. For a look at yours, call (656) 254-3570.

How new is too new to seal brick pavers?

Brick that is freshly installed should wait. Unilock says to hold off 60 to 90 days and until efflorescence has cleared, which can take up to a year, and Old Mill says at least 30 days and ideally up to a year. The sources do not match, so the contractor reads the surface and sets the date. To book a look, get a free estimate.

Pricing

What does brick paver sealing cost in Carrollwood?

No page opened for this site gives a rate for brick alone, so the table below builds one from the published range. Around Tampa Bay the posted rate is $1.25 to $2.50 a square foot for the whole job, and small jobs are often set by a minimum charge of $500 to $1,000. A sealer made for clay may change the quote. For a figure written for your brick, get a free estimate.

Ask each bidder to name the product and the number of coats. Already have a bid in hand? Call (656) 254-3570 and read it against the table.

Brick paver areaTypical exampleWhole job at the published range
300 sq ftBrick walkway and front steps$375 to $750, though a minimum charge of $500 to $1,000 often governs
600 sq ftBrick driveway$750 to $1,500
900 sq ftBrick patio with a walkway$1,125 to $2,250
1,200 sq ftBrick driveway with a front court$1,500 to $3,000

No page opened for this site publishes a rate for brick alone. These rows multiply the $1.25 to $2.50 a square foot that paver companies around Tampa Bay post for the whole job. A product formulated for clay may change a quote.

Get a Free Estimate

How often should brick pavers be resealed?

Rusty's says most paver surfaces want a new coat every 3 to 5 years, and Unilock gives the same span. Wear differs by spot, so a brick driveway tends toward the short end and a covered brick patio toward the long end. Unilock also says to test compatibility with the old sealer first. To plan the next coat, call (656) 254-3570.

Do shaded brick pavers need more cleaning?

Often. Rusty's lists shaded patios among the surfaces most vulnerable to mold, and the Tampa Bay climate is humid subtropical with afternoon storms through the summer. Carrollwood Village Park alone holds more than 300 trees, a sign of how much shade the area carries. Mention the damp corners of your brick when you get a free estimate.

Brick paver patio edge beside a lawn, cleaned and ready for sealer
How it works

What is the process for sealing brick pavers?

The process starts with identifying the brick and ends with a plan for the cure. To begin at the first step, call (656) 254-3570.

1. Identify the material

Clay brick or brick-look concrete, new or old, laid with sand or set another way. The answer picks the product.

2. Test a hidden spot

A small patch shows any darkening or sheen change before the whole surface is coated.

3. Clean and let it dry

Dirt, growth and efflorescence come off first, and the brick dries fully so nothing is locked underneath.

4. Fix the joints

Polymeric sand goes in, is swept clear of the faces and sets for 24 hours before the coat.

5. Apply the sealer

A sprayer and dry roller in one session, with a foam roller on borders, and a plan to keep sprinklers off through the cure.

Photos

What do sealed brick pavers look like around Carrollwood?

Freshly sealed paver driveway on brick pavers in Carrollwood
Sealed paver pool deck on brick pavers in Carrollwood
Sealed paver patio behind the home on brick pavers in Carrollwood
Sealed paver walkway to a front door on brick pavers in Carrollwood
Close view of freshly sealed pavers on brick pavers in Carrollwood
Paver area with one cleaned half beside a dirty half on brick pavers in Carrollwood
Contractor cleaning pavers on brick pavers in Carrollwood
Contractor sealing or sanding pavers on brick pavers in Carrollwood
Questions

Frequently Asked Questions

What are the downsides of sealing pavers?

Repeat cost is the main one, since a coat is redone every 3 to 5 years. For brick, Unilock adds that a sealer made for concrete may not suit brick or natural stone, and Old Mill Building Products says some sealers darken brick or change its sheen. A test spot answers both.

Is it better to spray or roll paver sealer on brick?

Unilock describes a sprayer for even coverage followed by a dry roller to remove extra. Brick drinks sealer unevenly, so the dry roller pass matters. The contractor should say how the product will be applied before you agree.

Can I seal my pavers myself?

Sealer is easy to buy, but brick is the surface where the wrong product does the most harm. Old Mill says outdoor brick wants a breathable penetrating sealer, and Unilock warns that a concrete sealer may not suit brick. Sorting that out is part of what a contractor does.

How often should brick pavers be sealed in Florida?

Rusty's Pro Wash & Seal says most paver surfaces want a new coat every 3 to 5 years, with driveways at 3 to 4. Unilock also says 3 to 5 years. A penetrating sealer can behave differently from a film, so ask what the label says.

Does sealing change the color of brick pavers?

It can. Old Mill says sealers can darken brick or change its sheen, and Unilock says a wet look sealer deepens color. A natural look finish stays closer to what you have now.

What is the difference between clay brick and concrete pavers when sealing?

Rusty's says brick absorbs sealers differently than concrete and often needs products made for clay, and that concrete pavers are the most common type around Tampa Bay. Tell the contractor which one you own.

How long should new brick pavers wait before sealing?

Sources differ. Unilock says to wait 60 to 90 days and for efflorescence to clear, usually 2 to 3 months and up to a year, while Old Mill says at least 30 days and ideally up to a year. A contractor can read the surface before picking a date.

Why do my brick pavers show a white haze?

That is usually efflorescence, a salt deposit that rises with moisture. Unilock says it typically fades in 2 to 3 months and can take up to a year. Old Mill says not to seal over it, because the sealer locks it in.

Is brick paver sealing priced differently from concrete?

No Tampa Bay page lists a separate brick rate. The published $1.25 to $2.50 per square foot covers clean, sand and seal, and a product made for clay may change what a contractor quotes. Ask for the sealer's name and what it costs per square foot.

Is there a minimum charge for a small brick patio?

Often there is. Rusty's says small projects are commonly set by a minimum charge of $500 to $1,000 in place of a per foot rate.

Want a sealer that suits your brick?

Call or send the short form, and a local contractor responds within 1 business day, usually sooner.

Call (656) 254-3570

Free, no obligation